Translations:Wiren Board 5:Первое включение/3/en

Материал из Wiren Board
Wiren Board 4
  1. Set the micro SIM (optional).
    Connector located on the left side of the controller.
    microSIM-card is inserted into socket contacts up , cut-off corner inside.
  2. Connect the external antenna.
    Screw the antenna GSM, Wi-Fi and 433 MHz (optional) connectors to the SMA.
  3. Plug the power supply.
    The power supply can be connected to the connector side. If you use a power supply for DIN-rail or other without connector, simply hold the wires in the terminals Vin and Gnd. It is also possible power Passive Power over Ethernet.
Источник — https://wirenboard.com/wiki/index.php?title=Translations:Wiren_Board_5:Первое_включение/3/en&oldid=7215