Translations:Wiren Board 6.1: GPIO List/19/en

|84||GPIO1_IO13 |13|||| transistor 1-wire pull up |- |77 |GPIO4_IO16 |112 | |transistor 1-wire pull up (W2) |- |36||GPIO1_IO27 |27|||| 5V out |- |176 ||GPIO3_IO14 |78 |LCD_DATA09||| RFM69H IRQ |- |178 ||GPIO3_IO13 |||LCD_DATA08|| RFM69H _DIO2 |- |180 |GPIO3_IO28 | |LCD_DATA23 |RFM69 MISO |- |182 |GPIO3_IO27 | |LCD_DATA22 |RFM69 MOSI |- |186 |GPIO3_IO25 | |LCD_DATA20 |RFM69 SCK |- |184 ||GPIO3_IO26 |||LCD_DATA21|| RFM69H chip select |- |102||GPIO4_IO23 |119|||| SIM900R power FET (RESET) |- |164||GPIO3_IO20 |84|||| SIM900R power KEY |- |166||GPIO3_IO19 |83|| || SIM900R power status (input) |- |188 |GPIO3_IO24 |88 | |SIM slot select (low: 1, high: 2) |- |23||GPIO2_IO19 |51||SD1_DATA1 || watchdog input |- |162||PWM1_OUT ||||| Buzzer |- |80|| ||||| Red LED |- |82|| ||| || Green LED |- |69 | | | |2nd ethernet LED |- |65||GPIO1_IO18 |18|||| STAT1 (BATTERY_CHARGING) |- |67||GPIO1_IO19 |19|||| STAT2 (BATTERY_PRESENT) |- |152||GPIO3_IO10 ||||| Wi-Fi power (active low) |- |29 |GPIO2_IO16 | | |i2c for RTC, SDA |- |31 |GPIO2_IO17 | | |i2c for RTC, SCL |- |144 |GPIO3_IO12 | |PAD_LCD_DATA07 |i2c for EEPROM1, SDA |- |142 |GPIO3_IO03 | |PAD_LCD_VSYNC |i2c for EEPROM1, SCL |- |160 |GPIO3_IO06 | |PAD_LCD_DATA01 |i2c for EEPROM2, SDA |- |158 |GPIO3_IO07 | |PAD_LCD_DATA02 |i2c for EEPROM2, SCL |- |75 |GPIO4_IO11 |107 | | USB power |- |154 |GPIO3_IO09 |73 | |V_OUT_ON |- |156 |GPIO3_IO08 |72 | |V_OUT_ST |- |102 |GPIO4_IO23 |119 |PAD_CSI_DATA02 |RS-485-1 failsafe bias |- |190 |GPIO3_IO23 |87 |PAD_LCD_DATA18 |RS-485-2 failsafe bias |- |40 |GPIO1_IO23 |23 |PAD_UART2_RTS_B |CAN transciever power |}