Translations:Wiren Board 6.7: Peripherals/23/en

|84 |GPIO1_IO13 |13 |JTAG_TDI |transistor lift 1-wire to the top (W2) |- |77 |GPIO4_IO16 |112 |NAND_DQS |transistor lift 1-wire to the top (W1) |- |36 |GPIO1_IO27 |27 | |5V out |- |23 |GPIO2_IO19 |51 |SD1_DATA1 |watchdog input (6.7-6.8) |- | ? |GPIO3_IO08 | - |LCD_DATA03 |watchdog input (6.9-) |- |162 |PWM1_OUT | |LCD_DATA00 |Buzzer |- |80 | | | |Red LED, indicator controlling |- |82 | | | |Green LED, indicator controlling |- |65 |GPIO1_IO18 |18 | |STAT1 (BATTERY_CHARGING) |- |67 |GPIO1_IO19 |19 | |STAT2 (BATTERY_PRESENT) |- |152 |GPIO3_IO10 |74 | |supply Wi-Fi (active low) |- |29 |GPIO2_IO16 |48 | |i2c for RTC, SDA |- |31 |GPIO2_IO17 |49 | |i2c for RTC, SCL |- |144 |GPIO3_IO12 |76 |PAD_LCD_DATA07 |i2c for EEPROM1, SDA |- |142 |GPIO3_IO03 |67 |PAD_LCD_VSYNC |i2c for EEPROM1, SCL |- |160 |GPIO3_IO06 |70 |PAD_LCD_DATA01 |i2c for EEPROM2, SDA |- |158 |GPIO3_IO07 |71 |PAD_LCD_DATA02 |i2c for EEPROM2, SCL |- |75 |GPIO4_IO11 |107 | |supply USB |- |154 |GPIO3_IO09 |73 | |V_OUT_ON |- |156 |GPIO3_IO08 |72 | |V_OUT_ST (6.7-6.8) |- |102 |GPIO4_IO23 |119 |PAD_CSI_DATA02 |RS-485-1 failsafe bias |- |96 |GPIO4_IO20 |116 |CSI_HSYNC |RS-485-2 failsafe bias |- |40 |GPIO1_IO23 |23 |PAD_UART2_RTS_B |CAN transciever power