Translations:Wiren Board 6: Модуль расширения 433MHz (WBE2S-R-433MHZ)/10/en

The module can only be installed in the MOD3 slot.Appropriate instructions for disassembling the enclosure can be found here: Disassemble the controller enclosure. The module has an SMA-Female connector for connecting an external antenna 433MHz. The connector is installed in a special hole in the controller housing above the Ethernet connectors with the RF Remote sticker (drilled in the controller housing starting from the Wiren Board 6.5 version). In Wiren Board 6 models of earlier versions, a hole with a diameter of 6.5 mm must be drilled at the specified location. The SMA socket of the module must be fixed in the hole in the housing. When reassembling the housing, make sure that the connecting cable from the module to the SMA socket does not get caught between the indicator and the plastic transparent light guide on the top cover of the controller. The external antenna is screwed onto the SMA socket.