Translations:Z-Wave/1/en

USB stick Z-Wave.Me UZBEKISTAN

To use Z-Wave devices with a Wiren Board controller, you will need:

1. USB-stick Z-Wave.Me UZB1. Buy from online store
2. Set optional Z-Way.

= = Software installation =

Software installation on Wiren Board 6 (new method)

1. Update the packages on the controller:

   apt update; apt upgrade
   

   read the messages Carefully, especially if permission is requested to remove packages or replace configuration files.
2. Install the required packages:

   apt install libarchive13 sharutils gawk libavahi-compat-libdnssd-dev
   

3. Download and install Z-Way:

   wget https://oldrazberry.z-wave.me/z-way-server/z-way-2.3.8_armhf.deb
   dpkg -i z-way-2.3.8_armhf.deb
   

   (current stable version; links to newer builds can be found here: https://z-wave.me/z-way/download-z-way/ https://oldrazberry.z-wave.me/z-way-server/?C=M;O=D)
4. Go to the Z-Way interface. To get there, you need to go to the IP-address of the controller, but at the end add port 8083, for example, "192.168.0.103:8083". When you first connect the server will ask you to set the administrator password - remember it.
5. Insert the USB stick into the controller. In the Z-Way interface, change the port for working with the Z-Wave stick to "/dev/ttyUZB": "menu button at the top right" - "Apps" - "Z-Wave Network Access" - "Serial port to Z-Wave dongle".