WBIO-DI-HVD-16: discrete 220V AC voltage presence detection inputs module
Purpose
Control of contactors, circuit integrity, etc.
Technical specifications
Contains 16 inputs to determine the presence of 220V. The operating voltage of the inputs is 50V-250V AC.
| Parameter | Value |
|---|---|
| Number of inputs | 16 |
| Isolated input groups | 2 |
| Input type | voltage input |
| Operating voltage | 50V AC |
| Rated voltage | 230V AC |
| Response time (230V AC), not more than | 100 ms |
| Isolation voltage between input and controller | 5000Vrms |
| Module type | I (inverted addr.) |
| Maximum power consumption | 1 mW |
| Width, DIN units | 3 |
| Size | 53.3x90.2x57.5 mm |
| Terminals and wire section | |
|---|---|
| The recommended wire cross section with pin bushing insulated tip, mm2 | 2,5 |
| Standard sleeve length of pin bushing insulated tip, mm | 8 |
| Tightening torque of screws, Н∙м | 0,5 |
Connection to the controller
See Activating the modules in the web interface of the controller
Connection
The inputs are separated by two isolated terminal groups: (1,2,3,4,5,6,7,8, N) and (N,9,10,11,12,13,14,15,16). N is a common zero for a group of inputs.
Device pictures and drawings
По ссылкам ниже вы можете скачать изображения и чертежи устройства WBIO-DI-HVD-16.
Corel Draw 2018: WBIO-DI-HVD-16.cdr.zip
Corel Draw PDF: WBIO-DI-HVD-16.cdr.pdf
Autocad 2013 DXF: Мы еще не подготовили чертеж этого устройства. Вы можете запросить чертеж устройства "voltage detection Module 220 V WBIO-DI-HVD-16" на портале техподдержки Wiren Board (необходима регистрация).