Translations:WB Debug Console/10/en: различия между версиями

Версия 19:14, 28 мая 2019

Run the application as an Administrator:
- In Windows - right click on the PuTTY icon and select Run This Program As An Administrator
- in Linux - run gksu putty
In the left menu, select the last item - Serial . In the fields that appear on the right, enter the port settings:
- title serial port
  - for Windows - it COM4 ( 'figure may vary' , can be found through the exact 'Device Manager', finding in it the adapter USB-UART)
  - for Linux - it / dev / ttyUSB0 ( 'figure may vary' , see the list of files in the folder / dev / )
- Speed - '115200'
- number of bits in a parcel - 8
- number of stop bits - 1
- parity - No
- flow control - No
In the left menu, select the first point - Session . The right to switch the connection type Serial - in field have to get the port settings. Then press the Open .
To check whether you are done, turn off the button and turn on the controller - on-screen message should appear on loading. After the download is complete, you will be prompted the login - enter root and press the Enter, and a password - enter wirenboard (input characters will not be displayed) and press the Enter .
You will see a welcome message - you are in the console controller.

@@ Строка 1: / Строка 1: @@
 # Run the application as an Administrator:
-#* In Windows - click on the icon PuTTY right click and select '' Run This Program As An Administrator ''
+#* In Windows - right click on the PuTTY icon and select '' Run This Program As An Administrator ''
-#* in Linux - <code> gksu putty </code>
+#* in Linux - run <code> gksu putty </code>
 # In the left menu, select the last item - '' Serial ''. In the fields that appear on the right, enter the port settings:
 #* title serial port