Translations:WB Debug Console/10/en

1. Run the application as an Administrator:
   • In Windows - right click on the PuTTY icon and select Run This Program As An Administrator
   • in Linux - run gksu putty
2. In the left menu, select the last item - Serial . In the fields that appear on the right, enter the port settings:
   • title serial port
     • for Windows - it COM4 ( 'figure may vary' , can be found through the exact 'Device Manager', finding in it the adapter USB-UART)
     • for Linux - it / dev / ttyUSB0 ( 'figure may vary' , see the list of files in the folder / dev / )
   • Speed - '115200'
   • number of bits in a parcel - 8
   • number of stop bits - 1
   • parity - No
   • flow control - No

   

3. In the left menu, select the first point - Session . The right to switch the connection type Serial - in field have to get the port settings. Then press the Open .

   

4. To see if you did it right:
   • for Wiren Board 5.8 and higher: press Enter. You are prompted to log in.
   • for Wiren Board 5.6 and lower, up to v.2.8: press the button to turn off and turn on the controller - the screen should display boot messages.
     • login prompt - enter "root" and press "Enter",
     • password prompt - enter "wirenboard" (no characters will be displayed) and press "Enter".
       
       
5. A welcome message appears - you are in the controller console. To go to the visual file Manager, type mc.