Translations:WB Debug Console/10/en: различия между версиями

Материал из Wiren Board
 
(не показано 10 промежуточных версий 3 участников)
Строка 1: Строка 1:
# Run the application as an Administrator:
# Run the application as an Administrator:
#* In Windows - click on the icon PuTTY right click and select '' Run This Program As An Administrator ''
#* In Windows - right click on the PuTTY icon and select '' Run This Program As An Administrator ''
#* in Linux - <code> gksu putty </code>
#* in Linux - run <code> gksu putty </code>
# In the left menu, select the last item - '' Serial ''. In the fields that appear on the right, enter the port settings:
# In the left menu, select the last item - '' Serial ''. In the fields that appear on the right, enter the port settings:
#* title serial port
#* title serial port
#** for Windows - it '' COM4 '' ('' 'figure may vary' '', can be found through the exact 'Device Manager', finding in it the adapter USB-UART)
#** for Windows - it '' COM4 '' ('' 'figure may vary' '', can be found through the exact 'Device Manager', finding in it the adapter USB-UART)
#** for Linux - it '' / dev / ttyUSB0 '' ('' 'figure may vary' '', see the list of files in the folder '' / dev / '')
#** for Linux - it '' / dev / ttyUSB0 '' ('' 'figure may vary' '', see the list of files in the folder '' / dev / '')
#* Speed - '115200'#* number of bits in a parcel - '' 8 ''
#* Speed - '115200'
#* number of bits in a parcel - '' 8 ''
#* number of stop bits - '' 1 ''
#* number of stop bits - '' 1 ''
#* parity - '' No ''
#* parity - '' No ''
Строка 12: Строка 13:
#: [[File: Putty serial settings.png | 500px]]
#: [[File: Putty serial settings.png | 500px]]
# In the left menu, select the first point - '' Session ''. The right to switch the connection type Serial - in field have to get the port settings. Then press the '' Open ''.
# In the left menu, select the first point - '' Session ''. The right to switch the connection type Serial - in field have to get the port settings. Then press the '' Open ''.
#:[[Файл:Putty serial open.png|500px]]# To check whether you are done, turn off the button and turn on the controller - on-screen message should appear on loading. After the download is complete, you will be prompted the login - enter '' root '' and press the '' Enter '', and a password - enter '' wirenboard '' (input characters will not be displayed) and press the '' Enter ''.
#:[[Файл:Putty serial open.png|500px]]
# You will see a welcome message - you are in the console controller.
#To see if you did it right:
#:[[Файл:Putty serial logged in.png|500px]]
#*for '''Wiren Board 5.8 and higher''': press Enter. You are prompted to log in.
#*for '''Wiren Board 5.6 and lower, up to v.2.8''': press the button to turn off and turn on the controller - the screen should display boot messages.  
#**login prompt - enter "root" and press "Enter",
#**password prompt - enter "wirenboard" (no characters will be displayed) and press "Enter".<br /><br />
#A welcome message appears - you are in the controller console. To go to the visual file Manager, type <code>mc</code>.<br /><br />
#:[[File:Putty serial logged in.png|500px]]

Текущая версия на 16:44, 7 июня 2019

  1. Run the application as an Administrator:
    • In Windows - right click on the PuTTY icon and select Run This Program As An Administrator
    • in Linux - run gksu putty
  2. In the left menu, select the last item - Serial . In the fields that appear on the right, enter the port settings:
    • title serial port
      • for Windows - it COM4 ( 'figure may vary' , can be found through the exact 'Device Manager', finding in it the adapter USB-UART)
      • for Linux - it / dev / ttyUSB0 ( 'figure may vary' , see the list of files in the folder / dev / )
    • Speed - '115200'
    • number of bits in a parcel - 8
    • number of stop bits - 1
    • parity - No
    • flow control - No
    Putty serial settings.png
  3. In the left menu, select the first point - Session . The right to switch the connection type Serial - in field have to get the port settings. Then press the Open .
    Putty serial open.png
  4. To see if you did it right:
    • for Wiren Board 5.8 and higher: press Enter. You are prompted to log in.
    • for Wiren Board 5.6 and lower, up to v.2.8: press the button to turn off and turn on the controller - the screen should display boot messages.
      • login prompt - enter "root" and press "Enter",
      • password prompt - enter "wirenboard" (no characters will be displayed) and press "Enter".

  5. A welcome message appears - you are in the controller console. To go to the visual file Manager, type mc.

    Putty serial logged in.png
Источник — https://wirenboard.com/wiki/index.php?title=Translations:WB_Debug_Console/10/en&oldid=24533