Relay Module Modbus Management/en: различия между версиями

Новая страница: «To enable Safety timer, you must write a value other than 0 to the storage register with the WRITE_SINGLE_REGISTER command at 8. This value is a timeout in second…»
(Новая страница: «=== Safe mode === In this mode, when the Modbus communication is terminated, the device disconnects the relay after a specified time.»)
(Новая страница: «To enable Safety timer, you must write a value other than 0 to the storage register with the WRITE_SINGLE_REGISTER command at 8. This value is a timeout in second…»)
Строка 15: Строка 15:
In this mode, when the Modbus communication is terminated, the device disconnects the relay after a specified time.  
In this mode, when the Modbus communication is terminated, the device disconnects the relay after a specified time.  


Для включения безопасного режима (Safety timer) нужно записать значение, отличное от 0, в регистр хранения командой WRITE_SINGLE_REGISTER по адресу 8. Это значение — таймаут в секундах. Значение "0" отключает безопасный режим.
To enable Safety timer, you must write a value other than 0 to the storage register with the WRITE_SINGLE_REGISTER command at 8. This value is a timeout in seconds. A value of "0" disables safe mode.


=== Режим работы реле в случае отключении питания ===
=== Режим работы реле в случае отключении питания ===
12 063

правки