Wb-mqtt-serial templates/en: различия между версиями

The [[WB-MS_Modbus_Sensor/en|WB-MS]] device is a universal combined Modbus sensor for temperature, humidity, lighting and sound pressure. The device provides access to data via Modbus input registers. The initial settings of the device are recorded in the holding registers, but are not used to obtain data and control the device, so the template is not included.You can see the full template code via the folloving link.

==== WB-MRGBW-D ==== [[WB-MRGBW-D|WB-MRGBW-D]] is a four channel dimmer to control the led strip. Can control RGB+W tape or four single color tapes independently. Brightness settings are stored in holding registers; the template describes which registers can be changed to get the desired brightness of the channels, track the dimmer button presses and get the value of the number of clicks.You can see the full template code via the folloving link.

Устройство [[WBIO-DO-R10A-8_Relay_Module|WBIO-DO-R10A-8]] — is a relay side module that connects directly to the controller's WBIO connector and is not Modbus controlled. But when it is connected via a WB-MIO or WB-MIO-E expansion device, it becomes a full-fledged Modbus device for which there is a corresponding template.You can see the full template code via the following link.

[[WB-MAP3H_Power_Meter/en|WB-MAP3H]] — three-channel electricity meter. It measures a large number of electrical network parameters. Since it can take quite a long time to poll all registers of such a device, there are several templates that contain the optimal set of parameters for the current task. We'll look at the basic pattern. You can see the full template code via link "Expand".