Translations:WB Debug Console/10/en

1. Run the application as an Administrator:
2. * In Windows - click on the icon PuTTY right click and select Run This Program As An Administrator
3. * in Linux - gksu putty
4. In the left menu, select the last item - Serial . In the fields that appear on the right, enter the port settings:
5. * title serial port
6. ** for Windows - it COM4 ( 'figure may vary' , can be found through the exact 'Device Manager', finding in it the adapter USB-UART)
7. ** for Linux - it / dev / ttyUSB0 ( 'figure may vary' , see the list of files in the folder / dev / )
8. * Speed - '115200'# * number of bits in a parcel - 8
9. * number of stop bits - 1
10. * parity - No
11. * flow control - No

    

12. In the left menu, select the first point - Session . The right to switch the connection type Serial - in field have to get the port settings. Then press the Open .

    # To check whether you are done, turn off the button and turn on the controller - on-screen message should appear on loading. After the download is complete, you will be prompted the login - enter root and press the Enter , and a password - enter wirenboard (input characters will not be displayed) and press the Enter .

13. You will see a welcome message - you are in the console controller.