Translations:Fast Modbus/34/en: различия между версиями

Материал из Wiren Board
 
Строка 11: Строка 11:
wb-modbus-scanner -d /dev/ttyRS485-1 -b 115200 -s 4267937719 -i 3
wb-modbus-scanner -d /dev/ttyRS485-1 -b 115200 -s 4267937719 -i 3
</syntaxhighlight>
</syntaxhighlight>
# Where, /dev/ttyRS485-1 is the port to which the device is connected,
# Where, /dev/ttyRS485-1 is the port to which the device is connected, 115200 is the exchange rate, 4267937719 is the device's serial number, 3 is the new slave ID.
# 115200 is the exchange rate,
# 4267937719 is the device's serial number,
# 3 is the new slave ID.
# As a result, the following output should appear:
# As a result, the following output should appear:
#:<syntaxhighlight lang="bash">
#:<syntaxhighlight lang="bash">

Текущая версия на 16:10, 29 декабря 2023

Определение сообщения (Fast Modbus)
#Установите утилиту командой:
#:<syntaxhighlight lang="bash">
apt update && apt install wb-modbus-ext-scanner
</syntaxhighlight>
#Остановите драйвер wb-mqtt-serial:
#:<syntaxhighlight lang="bash">
systemctl stop wb-mqtt-serial
</syntaxhighlight>
#Выполните команду
#:<syntaxhighlight lang="bash">
wb-modbus-scanner -d /dev/ttyRS485-1 -b 115200 -s 4267937719 -i 3
</syntaxhighlight>
#:где,      /dev/ttyRS485-1 — порт к которому подключено устройство,
#:115200 — скорость обмена, 
#:4267937719 — серийный номер устройства,
#:3 — новый slave ID.
#В результате должен появиться такой вывод:
#:<syntaxhighlight lang="bash">
Serial port: /dev/ttyRS485-1
Use baud 115200
Change ID for device with serial  4267937719 [FE638FB7] New ID: 3
</syntaxhighlight>
#Запустите обратно драйвер wb-mqtt-serial:
#:<syntaxhighlight lang="bash">
systemctl start wb-mqtt-serial
</syntaxhighlight>
  1. Install the utility using the command: 
    apt update && apt install wb-modbus-ext-scanner
  2. Stop the wb-mqtt-serial driver using the command: 
    systemctl stop wb-mqtt-serial
  3. Execute the command: 
    wb-modbus-scanner -d /dev/ttyRS485-1 -b 115200 -s 4267937719 -i 3
  4. Where, /dev/ttyRS485-1 is the port to which the device is connected, 115200 is the exchange rate, 4267937719 is the device's serial number, 3 is the new slave ID.
  5. As a result, the following output should appear: 
    Serial port: /dev/ttyRS485-1
Use baud 115200
Change ID for device with serial   4267937719 [FE638FB7] New ID: 3
  6. Start the wb-mqtt-serial driver again using the command: 
    systemctl start wb-mqtt-serial
Источник — https://wirenboard.com/wiki/index.php?title=Translations:Fast_Modbus/34/en&oldid=78256