Translations:Fast Modbus/34/en: различия между версиями
Строка 11: | Строка 11: | ||
wb-modbus-scanner -d /dev/ttyRS485-1 -b 115200 -s 4267937719 -i 3 | wb-modbus-scanner -d /dev/ttyRS485-1 -b 115200 -s 4267937719 -i 3 | ||
</syntaxhighlight> | </syntaxhighlight> | ||
# Where, /dev/ttyRS485-1 is the port to which the device is connected, | # Where, /dev/ttyRS485-1 is the port to which the device is connected, 115200 is the exchange rate, 4267937719 is the device's serial number, 3 is the new slave ID. | ||
# As a result, the following output should appear: | # As a result, the following output should appear: | ||
#:<syntaxhighlight lang="bash"> | #:<syntaxhighlight lang="bash"> |
Текущая версия на 16:10, 29 декабря 2023
- Install the utility using the command:
apt update && apt install wb-modbus-ext-scanner
- Stop the wb-mqtt-serial driver using the command:
systemctl stop wb-mqtt-serial
- Execute the command:
wb-modbus-scanner -d /dev/ttyRS485-1 -b 115200 -s 4267937719 -i 3
- Where, /dev/ttyRS485-1 is the port to which the device is connected, 115200 is the exchange rate, 4267937719 is the device's serial number, 3 is the new slave ID.
- As a result, the following output should appear:
Serial port: /dev/ttyRS485-1 Use baud 115200 Change ID for device with serial 4267937719 [FE638FB7] New ID: 3
- Start the wb-mqtt-serial driver again using the command:
systemctl start wb-mqtt-serial