12 063
правки
(Новая страница: «The screw-free terminal blocks on the relay board are used to connect power lines, control (RS-485) and input contacts. When using handpieces for installation of…») |
(Новая страница: «When connecting the switching devices to the relay contacts, it is important not to exceed the recommended current of '''3 A'''.») |
||
Строка 160: | Строка 160: | ||
The screw-free terminal blocks on the relay board are used to connect power lines, control (RS-485) and input contacts. When using handpieces for installation of wires in screw-free clamps, it is necessary that the diameter of the insulated cuffs does not exceed 3.6 mm, the wire section — 0.75 mm<sup>2</sup>, and the length of the conductive sleeve — 5-6 mm. Screw clamps accept wire section 2.5—4 mm<sup>2</sup>. The wire section must correspond to the switched load. | The screw-free terminal blocks on the relay board are used to connect power lines, control (RS-485) and input contacts. When using handpieces for installation of wires in screw-free clamps, it is necessary that the diameter of the insulated cuffs does not exceed 3.6 mm, the wire section — 0.75 mm<sup>2</sup>, and the length of the conductive sleeve — 5-6 mm. Screw clamps accept wire section 2.5—4 mm<sup>2</sup>. The wire section must correspond to the switched load. | ||
When connecting the switching devices to the relay contacts, it is important not to exceed the recommended current of '''3 A'''. | |||
Ток, протекающий при замыкании кнопки или выключателя, невелик, так что тип кнопки или выключателя может быть любым. Несмотря на встроенную защиту от дребезга, выбирайте качественные кнопки и выключатели, чтобы исключить ложные срабатывания из-за плохих контактов. | Ток, протекающий при замыкании кнопки или выключателя, невелик, так что тип кнопки или выключателя может быть любым. Несмотря на встроенную защиту от дребезга, выбирайте качественные кнопки и выключатели, чтобы исключить ложные срабатывания из-за плохих контактов. |
правки