Wbincludes:Mount MOD/en
Версия от 09:46, 18 августа 2022; A.Degtyarev (обсуждение | вклад) (Новая страница: «# Fasten the SMA socket connector with nuts in the case hole above the Ethernet connectors (available in Wiren Board versions 6.5 and older, in earlier versions, drill yourself with a diameter of 6.5 mm). # Reassemble the body. Keep an eye on the connecting cable from the module to the SMA socket: it must not be pinched, strongly bent, or get between the indicator and the light guide on the top cover. # Screw the external antenna onto the SMA socket. # When...»)
- Fasten the SMA socket connector with nuts in the case hole above the Ethernet connectors (available in Wiren Board versions 6.5 and older, in earlier versions, drill yourself with a diameter of 6.5 mm).
- Reassemble the body. Keep an eye on the connecting cable from the module to the SMA socket: it must not be pinched, strongly bent, or get between the indicator and the light guide on the top cover.
- Screw the external antenna onto the SMA socket.
- When mounting in a metal shield, position the antenna outside for reliable radio communication.