Controller hardware revisions/en
Версия от 18:46, 28 июня 2019; RomanKulibaba (обсуждение | вклад) (Новая страница: «|- |6x |12.2018 |Inscription r.6.5 on the bottom side of the board, the version in the interface | *Radiomodule is missing *SIM card 1 is located in the lower lef…»)
The definition of the revision
In the latest firmware versions, revision can be viewed in the web interface of the controller, Devices => System, channel system/HW Revision. Programmatical determination of the revision of the controller is possible via MQTT. If there is no such section in the interface, the controller can be identified by marking on the bottom side of the board (under the cover on the side of the DIN rail).
Wiren Board 6 revisions
Revision | Release date | Identification | Features | Firmware version | |
---|---|---|---|---|---|
6x | 12.2018 | Inscription r.6.5 on the bottom side of the board, the version in the interface |
|
6x | |
6.4.1 | 10.2018 | Надпись r.6.4.1 на нижней стороне платы, версия в интерфейсе | 6x | ||
6.4 | 09.2018 | Надпись r.6.4 на нижней стороне платы, версия в интерфейсе |
|
6x | |
6.3 | 02.2018 | Надпись Wiren Board 6 r.6.3 на нижней стороне печатной платы. | 61 | 6x |
Differences between Wiren Board 6 and Wiren Board 5
Overall change | Added | Removed |
---|---|---|
Expansion modules and backup power for Wiren Board 5 is not suitable for Wiren Board 6. |
|
Wiren Board 5 revisions
Revision | Release date | Identification | Differences from previous revision | Revision in the interface |
---|---|---|---|---|
5.9 | Added separate hardware RTC (non-volatile clock) | 58 | ||
5.8.1 |
Other:
|
58 | ||
5.6.1 | Inscription Wiren Board 5 r.6.1 on the bottom side of the PCB |
|
55 | |
5.6 | 04.2016 | Inscription Wiren Board 5 r.6 on the bottom side of the PCB.
No terminal strip R2 |
|
55 |
5.3 | 11.2015 | Inscription Wiren Board 5 r.3 on the bottom side of the PCB.
Terminals R1 and R2 presence |
52 |
Differences between Wiren Board 5 and Wiren Board 4
Overall change | Added | Removed |
---|---|---|
|
|
|