Translations:WB-MRM2-mini Modbus Relay Modules/8/en: различия между версиями

Материал из Wiren Board
(Новая страница: «The inputs have several modes of operation: trigger mode (for control with buttons) and repeat mode (for control with switches). In the trigger mode, to change th…»)
 
Строка 1: Строка 1:
The inputs have several modes of operation: trigger mode (for control with buttons) and repeat mode (for control with switches). In the trigger mode, to change the state of the relay, it is enough to close and open the input once. The change of state occurs on the rising edge (that is, when the circuit). In the repeat mode, the relay state is determined by the input state: the input is closed — the relay is on, open — the relay is off. Details about the mode switching  are written in [[ Modbus Management Of Relay Modules/en|Modbus Management Of Relay Modules]].
The inputs have several modes of operation: trigger mode (for control with buttons) and repeat mode (for control with switches). In the trigger mode, to change the state of the relay, it is enough to close and open the input once. The change of state occurs on the rising edge (that is, when the circuit). In the repeat mode, the relay state is determined by the input state: the input is closed — the relay is on, open — the relay is off. Details about the mode switching  are written in [[ Relay Module Modbus Management/en|Relay_Module_Modbus_Management]].

Версия 17:53, 27 ноября 2019

Определение сообщения (WB-MRM2-mini Modbus Relay Modules)
Входы имеют несколько режимов работы, в частности поддерживаются триггерный режим (для управления с помощью кнопок) и режим повторения входа (для управления с помощью выключателей). В триггерном режиме для изменения состояния реле достаточно однократно замкнуть и разомкнуть вход. Изменение состояния происходят по переднему фронту (то есть при замыкании). В режиме повторения состояние реле определяется состоянием входа: вход замкнут — реле включено, разомкнут — выключено. Подробно о режимах работы входов написано в разделе [[Relay Module Modbus Management|Управление модулями реле Wirenboard по протоколу Modbus]].

The inputs have several modes of operation: trigger mode (for control with buttons) and repeat mode (for control with switches). In the trigger mode, to change the state of the relay, it is enough to close and open the input once. The change of state occurs on the rising edge (that is, when the circuit). In the repeat mode, the relay state is determined by the input state: the input is closed — the relay is on, open — the relay is off. Details about the mode switching are written in Relay_Module_Modbus_Management.

Источник — https://wirenboard.com/wiki/index.php?title=Translations:WB-MRM2-mini_Modbus_Relay_Modules/8/en&oldid=36279