WBE2S-MICROSD MicroSD Extension Module/en: различия между версиями
(Новая страница: «Supported cards: microSD, microSDHC. Maximum interface speed supported: "high speed" (18MB/s for revision 5.3, 4.5 MB/s for revision 5.6). Standard UHS is not su…») |
(Новая страница: «==Configuration==») |
||
Строка 19: | Строка 19: | ||
== | ==Configuration== | ||
Версия 12:52, 27 июня 2019
Hardware
Can be installed only in MOD3 slot of the Wiren Board 6 controller.
the microSD card is inserted into the slot under the top cover of the controller.
To access the connector, pry the cover off with a flat screwdriver and remove it.
The module comes without a microSD card!
Supported cards: microSD, microSDHC. Maximum interface speed supported: "high speed" (18MB/s for revision 5.3, 4.5 MB/s for revision 5.6). Standard UHS is not supported (card is working in the mode of "high speed").
Configuration
Настройка осуществляется в веб-интерфейсе. Раздел Configs => Hardware Modules Configuration. Далее в Internal slot 3 выбрать "WBE3-MICROSD: microSD module" и нажать Save.
Устройство определяется сразу же, перезагрузка не требуется.
Работа
Карта памяти определяется в системе как mmc1. Вся карта доступна как устройство /dev/mmcblk1, разделы на карте как /dev/mmcblk1p0 и т.д.