WBIO-DO-R1G-16 1A Relay Module/en: различия между версиями
(Новая страница: «<nowiki>**</nowiki>) Calculated value») |
(Новая страница: «{| class="wikitable" !colspan="2" | '''Terminals and wire section''' |- || The recommended wire cross section with pin bushing insulated tip, mm<sup>2</sup> ||…») |
||
| Строка 85: | Строка 85: | ||
{| class="wikitable" | {| class="wikitable" | ||
!colspan="2" | ''' | !colspan="2" | '''Terminals and wire section''' | ||
|- | |- | ||
|| | || The recommended wire cross section with pin bushing insulated tip, mm<sup>2</sup> || 2,5 | ||
|- | |- | ||
|| | || Standard sleeve length of pin bushing insulated tip, mm || 8 | ||
|- | |- | ||
|| | ||Tightening torque of screws, Н∙м || 0,5 | ||
|- | |- | ||
|} | |} | ||
Версия 16:33, 15 июля 2019
Purpose
Control of contactors, warning lights, etc.
Technical specifications
Contains 16 HF49FD relays [(Datasheet)] with the configuration of contacts SPST (two contacts on the relay: NO/COM).
The relays are combined into two groups of 8 pieces, each group has one common COM pin: the upper COM pin for relays K1 — K8 and the lower COM pin for relays K9 — K16. There's no connection between groups, so the first group can switch one voltage source, and the second - the other.
Rated channel current: 1 A. The module has protection against sparking of the contacts.
Our detailed article in russian on habr.com about the choice of relay parameters for the switched load: https://habr.com/ru/company/wirenboard/blog/422197/
| Parameter | Value |
|---|---|
| Number of outputs | 16 |
| Number of output groups | 2 |
| Output type | mechanical relay |
| Contact configuration | SPST, normally open
states:
|
| Maximum switching voltage, alternating current | 250 V |
| Maximum switching voltage, direct current | 30 Volts |
| Maximum switching current, per channel (*) | 5 A |
| Maximum switching current,
the channels in one group |
10 A |
| The channel resistance in the open state | < 50 mW |
| Voltage isolation between the controller and the output | 2000 V (RMS.) |
| Lifetime: number of switches
for load 3 A 230 V AC, cos φ = 1 |
100 000 |
| Lifetime: number of switches
for load 0.1 A 230 V AC, cos φ = 1 (**) |
1 000 000 |
| Module type | "O" (non-inverted address scheme) |
| Maximum power consumption | 1 W |
| Width, DIN units | 3 |
| Size | 53,3x90,2x57,5 mm |
*) Maximum switching current is specified for 230 VAC resistive load.
**) Calculated value
| Terminals and wire section | |
|---|---|
| The recommended wire cross section with pin bushing insulated tip, mm2 | 2,5 |
| Standard sleeve length of pin bushing insulated tip, mm | 8 |
| Tightening torque of screws, Н∙м | 0,5 |
Подключение к контроллеру
Смотрите раздел Активирование в веб-интерфейсе контроллера
Подключение нагрузки
Реле подключаются в разрыв фазы.
Изображения и чертежи устройства
По ссылкам ниже вы можете скачать изображения и чертежи устройства WBIO-DO-R1G-16.
Corel Draw 2018: WBIO-DO-R1G-16.cdr.zip
Corel Draw PDF: WBIO-DO-R1G-16.cdr.pdf
Autocad 2013 DXF: WBIO-DO-R1G-16.dxf.zip
Autocad PDF: WBIO-DO-R1G-16.pdf