A new 6-channel relay module of 6 normally closed type relays WB-MR6C/NC is on sale.
Designed for direct control of low-power load (up to 2A) without large starting currents: signal lamps, intermediate contactors.
Not suitable for switching power supplies and LED lamps.
The price is 3200 ₽. Buy.
A new compact 6-channel relay module WB-MR6CU is on sale.
Designed for direct control of low-power load (up to 7A) without high starting currents: signal lamps, intermediate contactors.
Does not support switching of power supplies and LED lamps.
The module is designed in the 2U DIN-railed enclosure, 36x90x58 mm.
The price is 3200 ₽. Buy.
New video of the electrical panel project with our equipment made by konstartstudio integrators.
Already at the POWER GRIDS International Forum, we answer the questions of the first visitors! Waiting for you from today and until December 6, from 10 to 18 (6.12 to 13.00), pavilion 75 at VDNH, Hall B, stand B151.
Register for a free ticket.
Clearly described experience of designing a smart home system without programming knowledge.
Thank you for joining us these three days at Hi-Tech Building-2019, you are always welcome, so are your questions and suggestions, your feedback. This year we had even more visitors at the stand! Thank you for your appreciation of our work and products.
The new compact module of uninterruptible power supply WB-UPS on lithium-polymer batteries is on sale. Designed to maintain the operation of the controller and connected modules in case of power loss, supports two operating modes: 12 and 24 V, DIN-railed mount. The price is 3000 ₽. Buy
On the example of the project(in Russian), our partner - integrator Flagman will illustrate the typical stages in the home automation based on the Wiren Board equipment.
Our partner - integrator Comfort-Life has released a detailed article about setting up and using Apple, Google Home and Yandex Alice voice assistants. The project was implemented on the Wiren Board equipment. Read more on our partner portal Sprut.ai: https://sprut.ai/client/companies/portfolio/3/1523
We present our new WBE2R-R-ZIGBEE module which allows to control Zigbee devices. Now the controller can manage numerous and inexpensive devices supporting the ZigBee protocol – a wireless standard similar to Wi-Fi and Bluetooth, but designed specifically for the Internet of things, smart home and other solutions. The scope of ZigBee networks extends from home automation (control of light, household appliances, audio-video equipment) to the construction of monitoring systems for large industrial facilities ( device temperature and vibration control, collecting readings of electricity, water and gas consumption sensors, fire and security sensors, etc.). ZigBee is used by all major companies on the smart home market.
The price is 2000 ₽
An updated version of the WBMS sensor v.2 measures the temperature, humidity, concentration of volatile organic compounds (VOC) and lighting.
- Improved Board circuitry, added 5V output for 1-Wire sensors
- You can use 1-Wire inputs as discrete or counting inputs
- Connection via RS-485 interface, Modbus RTU control
The device supports firmware update via Modbus.
Starting from 2500 ₽
We present our new WB-MCM8 - pulse counter module with 8 inputs of dry contact or open collector type. The device is designed for connecting water, electricity, gas, and other types of meters.
This model replaces the outdated module WB-MCM16.
The price is 3000 ₽. Buy.
A special version of our controller for solving the problems of heating automation - SmartWeb K was released jointly with our partner Teplomonitor, the details are available here.
An excellent article about the automation of a residential private house using the Wiren Board controller and various modules with a detailed description of the process. We are glad that the author estimated reliability of our products for industrial automation and applied them. If you want to share your experience, please send your stories to email@example.com marked "My solution on Wiren Board", we will publish the best materials in a separate section on the website.
New firmware will expand the functionality and fix old bugs. Updating is possible from a computer or directly from the Wiren Board controller for the running installation, you do not need to turn off any of the devices.
We discontinue the production of the WB-MSGR gas sensor because of low demand. Instead of a single sensor there will be an option "detection of combustible gases" for WB-MS and WB-MSW v.3 sensors. Do not put WB-MSGR in projects, the remains are sold out. The model will be available for order within 3 months.
Dear colleagues and partners, see you on our stand at the International Smart Energy Summit 2019 exhibition.
15% DISCOUNT on any form of participation with the promo code WirenBoardSES
Dear friends, March 12-15, 2019, Moscow in Crocus Expo Center in participation with our partner "NPK "Vacuum developments" Wiren Board will take part in Russia's largest International construction and interior exhibition BATIMAT RUSSIA. Look forward to meeting you!
Our Wiren Board 6 controller now supports ISaGRAF 6 (a development tool infrastructure for applications written in the IEC languages for the controllers). The system supports IEC 61131-3 and IEC 61499 languages and I/O Wiren Board modules.
For more information please visit official ISaGRAF distributor's website.
Dear customers, the new batch of Wiren Board 6.5 controllers is available.
New version provides an easy access to the SIM card slot, the radio module has been removed from the mainboard and now is available as the extension module. The power range was extended up to 48V.
We have released the new version of the WB-M1W2 bus coupler, which allows to use 1-Wire sensors in noisy environmnent and at a considerable distance from the controller.The new module has got the 5V output to power 1-Wire sensors for three-wire connection and the waterproof case. Now WB-M1W2 is protected from dust and water splashing.The new price is 1300₽
Dear system integrators!
What is the fastest and the most convincing way to sell Wiren Board based automation solutions to a new customer?
— to describe the brilliant perspectives and waving your hands in an imposing way?
— to show the presentation on your laptop?
— to arrange the meeting on your previous customer`s site as an example, wait and hope that the customer will not miss the date?
We believe that the best choice is to show a handy case with our equipment - a working model of the future installation. Good news - no need to suffer with the design, compressing the wires and flipping a mountain of documentation. We will do everything for you, for free!
Dear friends, now our 6-channel relay modules are not only reliable and convenient, but also 16% cheaper on average!
Our prices were changed:
WB-MR6LV/S 6 000 => 4 800 (1200 rub cheaper)
WB-MR6LV/I 5 800 => 4 500 (1300 rub cheaper)
WB-MR6HV/S 6 400 => 5 800 (600 rub cheaper)
WB-MR6HV/I 6 200 => 5 500 (700 rub cheaper)
WB-MRPS6/S 5 200 => 4 200 (1000 rub cheaper)
In September we have issued the third version of the hybrid wall sensor WB-MSW. After the first announcements and recalls, we decided to launch the mass production.
The module can be equipped with several different sensors: temperature+humidity, lighting, noise, the precise concentration of CO2, the motion sensor, the sensor of volatile organic compounds,and the long-range infrared transceiver to control home appliances. The module has got a pretty nice and solid case, and measures one and a half times more parameters for the lower price.
Buy for 9900р
We have launched the production of the WB-MWAC module: the water consumption meter and the leakage detector. The module has 3 channels for leak sensors, 3 channels for manual control switches, 2 channels to connect pulse water meters and 2 channels for motorized water valves. All you need for the typical control of the wet core area in your apartment.
You can place the order by mail: firstname.lastname@example.org
Dear friends! We invite you to meet Wiren Board at the main exhibition for automation - Hi-Tech Building 2018. At the joint exposition our partners integrators INSAT, XIOT, TECO, Recota, Telemonitor will present their completed projects based on our equipment.
Place and time: October 24-26, from 10 till 18 (schedule and how to get there).
Moscow, Expocentre (Krasnopresnenskaya embankment, 14), pavilion Forum, stand HTB-27. To get a free ticket, you must register on the exhibition website.
Looking forward to meeting you!
We are preparing to participate in two major trade shows of this fall: "Automation" in St.-Petersburg and "Hi-Tech Building" in Moscow. This time we have invited our friends and partners who are engaged in the automation of residential buildings and creation of projects based on our equipment. So if you wanted to see some ready-made examples, we will show them with great pleasure.
The new version of the four-channel dimmer WB-MRGBW (D) is developed for control of LED RGB or RGB+W strips or four white LED strips.The dimmer has 2 units wide DIN-rail enclosure. It replaces the WB-MRGB(D) models. They are laid off, shop residuals are sold - don't put them into projects.
We placed the Wiren Board 6 controler on retail.
The processor was replaced with more productive i.MX 6ULL (Cortex A7, 800 MHz and DDR3 512 MB). Due to this, the controller works faster. Moreover, we have returned on habr.com and we will write interesting articles. And our first article is about WB6, in which we explicitly tell, what changes were introduced, and, above all - why they were made.
The new WB-MRWL3 modules are designed for switching general purpose high-power loads, including induction loads: you can control groups of sockets, motors, heaters, etc. Rated load up to 20A (4.5 kW) per channel.
5 years ago, in 2013, we have announced the first version of Wiren Board controller on Russian well-known Hi-tech resource Habr.com All this time we relied on your feedback and requests.Thank you for your trust and support!
Here's our new WB-MAP device: WB-MAP6 is a single phase energy meter for six single phase loads. You can set it in your apartments to see the power consumption for each home appliance.
We present a new compact six-channel relay module WB-MRPS6 with high-power relays. The device is designed for switching power loads for general purposes, including inductive and capacitive ones: LED lamps, incandescent lamps, pulse power supply units; for use in the PDUs, etc.
The modules are designed for a maximum current of 16A (nominal 10A load) and can be used without additional contactors.
Dear customers, partners and friends!
Over the past 2017, we have been working hard to maintain your interest and confidence.We have produced tens of thousands Wiren Board devices and shipped them to Russia, Belarus, Ukraine, Kazakhstan, Azerbaijan, Taiwan, Austria and other countries. It`s magical and great to see how the automation market is developing and growing.Thank you for being with us. Be healthy, beloved and happy.
We wish you all the best In the New 2018 year!
We have established the development and production of new series of devices.The first model is WB-MAP12(H)