WIRENBOARD PRO

WBPRO-PLC8-4G-64G — are used in the tasks of monitoring server and climate equipment, dispatching and collecting data from metering devices, as the basis for "smart home" and industrial automation.

Relay module with high in-rush current capacity for lighting management and switching general purpose loads.

Relay module with high in-rush current capacity for lighting management and switching general purpose loads. Designed for industrial and home automation systems.

The module is designed to control loads up to 10A rated (16 A peak current) without contactors. It is equipped with a special input for simultaneous cutoff of all loads.

The WBPRO-METER3 energy meter is an ideal choice for industrial metering installations in apartment houses and office buildings as well as for monitoring consumers in data centers and smart offices. Designed for operation in single phase or three phase AC networks.

External split-core current transformers allow for installation on live circuits with zero downtime.

The WBPRO-METER3 can measure inrush currents of various equipment, such as lighting features or motors. It can detect and measure voltage surges as well.

Designed for commuting and monitoring of powerful power load of general purpose, including inductive: control of groups of sockets, motors, heaters, etc. Rated load up to 20A (4.5 kW) per channel, can be used directly without intermediate contactors for switching socket groups and other loads protected by a 16A circuit breaker. The device works only when 12-28V voltage is applied to the V+ and GND terminals.

Designed for direct control of LED, incandescent and fluorescent lighting and other loads.

Each output is rated 10A and can withstand inrush current as high as 80A and continous load of up to 16A.

Also used as general-purpose discrete input/output module.

Takes only two modules on a DIN rail.

Designed for direct control of LED, incandescent and fluorescent lighting and other loads.

Each output is rated 10A and can withstand inrush current as high as 80A and continous load of up to 16A.

The module has a built-in power supply that allows:

• Save space and simplify installation in small installations without a controller: no need for an external power supply and wires for it. At the same time, you will receive local control from the buttons and a reserve for future automation.
• Ensure that the relay operates when the low-voltage RS-485 bus is disconnected or damaged — module will automatically switch to the internal power supply and continue to work in the mode specified during configuration.
• Emulate relays with normally closed contacts, but much more current than such relays traditionally switch.

Also used as general-purpose discrete input/output module.

The device works with the Fast Modbus protocol extension — provides scanning capabilities, convenient configuration and instant polling of device status.

Compact relay module with high in-rush current capacity for lighting management and switching general purpose loads.

Relay module with high in-rush current capacity for lighting management and switching general purpose loads.

The WBPRO-METER12 multi-circuit energy meter is an ideal choice for industrial metering installations in apartment houses and office buildings as well as for monitoring energy usage in data centers and smart offices. Designed for operation in single phase or three phase AC networks.

External split-core current transformers allow for installation on live circuits with zero downtime.

The WB-MAP12E can measure inrush currents of various equipment, such as lighting features or motors. It can detect and measure voltage surges as well.

The WBPRO-METER6 energy meter is perfect for consumption analysis in apartments and private homes. It is designed for operation in single phase AC networks.

Available upon request.

Designed for dimming incandescent lamps, this dimmer also supports dimming LED bulbs, LED strips’ drivers, electronic power transformers driving halogen lights, etc.

Supports leading-edge and trailing-edge dimming.

Can be used to control the speed of a fan.

Компактный модуль с интерфейсом RS-485 и универсальными входами для подключения 1-Wire датчиков и дискретных сигналов. Размер 34 x 19 x 17 мм.

Применяется для опроса 1-Wire датчиков в условиях сильных помех и на большом удалении от контроллера. Опроса кнопок, герконов, счетчиков энергоресурсов с импульсным выходом. Является средством измерения.

Основные отличия от предыдущей версии — компактные размеры, что позволяет размещать устройство в подразетниках.

Everything you need for a typical task of monitoring the “wet zone” of an apartment, house or industrial facility:

• water leak detection
• automatic control of shut-off valves
• counting pulses from water meters even in the absence of electricity.

Up to 6 monitoring zones, “dry contact” outputs, “wet cleaning” mode and easy integration into the automation system.

The main differences from the previous version: by default, five inputs are configured for connecting sensors, input activation indicators, two buttons on the front panel, support for Larnitech sensors and a “wet cleaning” mode.

Determination of coordinates. Standard time signal. Installed in the extension module connector in the controller enclosure.

Supports all common types of temperature sensors, thermocouples, 4-20mA signals, and other standard analog signals.

6 channels, each of which can be connected to one or two sensors, depending on the type that is selected in the settings. Two 5V DC outputs to power sensors.

The module is built on a precision low-noise 16-bit ADC with an error of 0.1%, operation in the industrial temperature range, and with an input signal amplification of 128 times without loss of accuracy.

Pulse counter module for connecting water, electricity, gas, and other types of meters with pulsed outputs of dry contact or open collector type.

When using momentary switches, the module can recognize up to four types of pressing and transmit events to the controller via Modbus.

Adds a Zigbee interface. It is installed in the connector on the controller board.

Wi-Fi antenna is included, connection is made through the SMA male connector.

Zigbee is a wireless communication standard as Wi-Fi and Bluetooth, created specifically for the Internet of things: from home automation (control of light, household appliances, audio-video equipment) to the construction of monitoring systems for large industrial facilities (temperature control and vibration of devices, collection of readings of electricity, water and gas consumption sensors, survey of fire and security sensors, etc.). Zigbee is used by all large companies in the smart home market.

Modbus IR remote control module. It can be used for remote control of climate control stations, fan coils, TV, lightening and other devices with IR-interface. Module has RS-485 interface for programming and control by PC or controller using Modbus RTU protocol.

Before using module must be teached using original remote control or IR commands can be programmed using RS-485 interface. It can store up to 32 IR commands.

Module has very small transmitter wich makes it almost invisible.Learning module with infrared transmitter. Controls air conditioning units, fan coils, TV sets etc. The module is managed by a controller or PC via RS-485 through Modbus RTU protocol commands.

The module transmits data of two 0-20 mA signals via Modbus RTU.

For installation in a junction box.

Dimensions 57 х 18 х 14 mm

The module is designed to monitor the state of circuit breakers, interrogate signal lamps, etc.

4-channel dimmer to control LED strips: colored (RGB, RGB+W), yellow-white (CCT) or white (W). Types of connected strips, PWM frequency and the function of inputs can be changed in device settings.

The dimmer can be configured in web interface of a Wiren Board controller, by third-party controllers or by PC with RS-485 adapter.

Allows you to separate the I/O modules from the Wiren Board controller and move them to another DIN rail or into another electric cabinet.

This bus coupler allows you to use the I/O modules as standalone devices with third party controllers.

The device works with the Fast Modbus protocol extension — provides scanning capabilities, convenient configuration and instant polling of inputs.