Discontinued or deprecated models
Discontinued. Recommended replacement - WB-MWAC v.2
Everything you need for the typical task of monitoring the wet core of the apartment:
- water leak detection,
- automatic control of shut-off valves,
- counting pulses from water meters even in case of power loss
The device works with the Fast Modbus protocol extension — provides scanning capabilities, convenient configuration and instant polling of device status.
Outdated model, discontinued. Recommended WB-MSW v.4.
Hybrid digital sensor of temperature, humidity, illumination, noise, CO2 and VOC level. It is equipped with the IR blaster (and the receiver for learning). Designed for climate control in residential and office premises.
Outdated model, discontinued. Recommended WB-MSW-LORA v.4.
Wireless hybrid digital sensor of temperature, humidity, illumination, noise, CO2 and VOC level. It is equipped with the IR blaster (and the receiver for learning). Designed for climate control in residential and office premises.
The sensor connects to the Wiren Board controller via LoRa or RS-485. The mode is selected by a switch on the board, in all cases the device needs external power. When using LoRa, you need to put a extension module in the controller WBE2R-R-LORA.
Outdated model, discontinued. Recommended WB-MSW-ZIGBEE v.4.
Hybrid digital sensor of temperature, humidity, illumination, noise, CO2 and VOC level. It is equipped with the IR blaster (and the receiver for learning). Designed for climate control in residential and office premises.
The sensor connects to the Wiren Board controller via Zigbee or RS-485. The connection method is selected by a switch on the board, in all cases the device needs external power. When using Zigbee, you need to put an adapter in the controller WBE2R-R-ZIGBEE.
Wiren Board is designed for home and industrial automation and monitoring. It is suitable for polling sensors and meters, for sensors and meters data acquisition, and as a transmission device, as a replacement of programmable logic controllers, in SCADA and in Smart Home systems. The number of ports and interfaces supported and the user-friendly Web interface allow you to use the Wiren Board as a Smart Home master controller working together with wireless and wired devices from other manufacturers. Protection of ports from excessive voltage surges, the enclosure compatible with a DIN rail, the watchdog timer allow you to use the Wiren Board controller in solutions where the reliability of operation is of utmost importance.
Iridium server is a platform for smart home and IoT controllers known to developers in 25 countries for its convenience in design, configuration flexibility and ease of use.
You can use it to tailor the interface to manage both smart home and smart office from portable and stationary devices, configure remote control and scenarios.
Examples of iRidium projects.
The panel has been discontinued. Recommended replacement YC-SM41P
Panel with IPS display and touchscreen for creating HMI panels.
The device comes with pure Android 8 without vendor lock and unnecessary applications.
Interactive SVG panels for Wiren Board controllers are created in the built-in editor, using Node-RED or in Home Assistant, Intra House, Intra SCADA, Rapid SCADA, Master SCADA, etc.
The presence of Ethernet with PoE simplifies the installation of the panel and allows you to use it at sites where it is impossible to use Wi-Fi. The absence of a battery eliminates the need to change it regularly.
Third party equipment, 1 year warranty.
Made in China.
Designed for direct control of low-power loads (rated current 7 A) and contactors
4-channel dimmer to control LED strips: colored (RGB, RGB+W), yellow-white (CCT) or white (W). Types of connected strips, PWM frequency and the function of inputs can be changed in device settings.
The dimmer can be configured in web interface of a Wiren Board controller, by third-party controllers or by PC with RS-485 adapter.
The dimmer can work stand-alone or paired with a controller. If you need more power, you can combine dimmer channels or use WB-AMPLED amplifier.
The remaining stock of the old revision is being sold. In new projects, please use the revision 8.5.
Wiren Board 8 is a PLC powered by free software.
Wiren Board PLC are used in the tasks of monitoring server and climate equipment, dispatching and collecting data from metering devices, as the basis for "smart home" and industrial automation.
Main differences from Wiren Board 7: 64-bit ARM processor 1.5 GHz 28 nm, up to 4 GB of RAM, CAN is now an expansion module. In revision 8.4, only discrete input and output modules can be installed in MOD1, MOD2 and MOD3 without restrictions, and MOD4 is not available.
Discontinued, recommended replacement Wiren Board 8M
Wiren Board 7M is a PLC powered by free software.
Wiren Board M series PLC are used in the tasks of monitoring server and climate equipment, dispatching and collecting data from metering devices, as a basis for industrial automation. The metal case with the possibility of grounding protects the controller from electromagnetic interference and mechanical damage.
Different types of mounts allow you to install the device on a DIN rail or in a 19" server rack.
The module has been discontinued. Recommended replacement WB-M1W2 v.3
Compact adapter with RS-485 interface and universal inputs for connecting 1-Wire sensors and discrete signals.
Used to poll 1-Wire sensors in conditions of strong interference and at a great distance from the controller. Polling buttons, reed switches, energy meters with pulse output.
There is a more compact version WB-M1W2 v.3
This model has been discontinued. Please use WB-MDM3 instead.
Designed for dimming incandescent lamps, this dimmer also supports dimming LED bulbs, LED strips’ drivers, electronic power transformers driving halogen lights, etc.
Supports leading-edge and trailing-edge dimming.
Can be used to control the speed of a fan.
This model has been discontinued. It has been replaced by the WB-MRGBW-D model. For gross purchases please contact us info@wirenboard.com.
Three channel dimmer for managing LED strips. Can manage one RGB strip or three monochrome strips individually
Wiren Board is designed for home and industrial automation and monitoring. It is suitable for polling sensors and meters, to be used as a data acquisition and transmission device, as a replacement of programmable logic controllers, in SCADA and in Smart Home systems.
The number of ports and interfaces supported and the user-friendly Web interface allow you to use the Wiren Board as a Smart Home master controller working together with wireless and wired devices from other manufacturers. Protection of ports from excessive voltage surges, the enclosure designed to be mounted on a DIN rail, the watchdog timer allow you to use the Wiren Board controller in solutions where the reliability of operation is of utmost importance.
The Z-Wave.Me Z-Stick 4 USB stick allows you to connect your Wiren Board controller to the Z-Wave network.
Included is the license for Z-Wave.Me Z-Way software stack for Z-Wave network.
Supports standard Zensys API (SerialAPI) and is compatible with commonly used software packages such as HomeSeer, Z-Command, mControl, Linux MCE.
Discontinued due to low demand. As a replacement, we suggest using the model WB-MSW-ZIGBEE v.4. Don’t put it into projects; leftovers are being sold out in the warehouse. The model is available for order within three months.
Combined digital sensor for temperature, humidity, light, motion, noise, CO2 and volatile organic compounds. Has a built-in receiver and transmitter of IR signals for controlling household appliances. Uses the LoRa wireless protocol to transmit data.
It is used to measure climate parameters in difficult radio environments, for example, basements with thick walls, remote warehouses and change houses, rooms on different floors of a building.
Connects to the Wiren Board controller via LoRa or RS-485. The connection method is selected by a switch on the board; in all cases, the device requires external power. When using LoRa, you need to install the WBE2R-R-LORA adapter into the controller.
Adds a Zigbee interface. It is installed in the connector on the controller board. For Wiren Board 6 and 7.
Wi-Fi antenna is included, connection is made through the RP-SMA female connector.
Zigbee is a wireless communication standard as Wi-Fi and Bluetooth, created specifically for the Internet of things: from home automation (control of light, household appliances, audio-video equipment) to the construction of monitoring systems for large industrial facilities (temperature control and vibration of devices, collection of readings of electricity, water and gas consumption sensors, survey of fire and security sensors, etc.). Zigbee is used by all large companies in the smart home market.
Recommended Replacement WB-REF-U
Network card for Carel refrigeration controller, which adds an RS-485 interface with Modbus RTU protocol support. The device is connected to the Carel controller through a standard connector. Flex cable included.
WB-REF-U-CR can be used instead of original network card IROPZ48505 (IROPZ48500) to connect Carel temperature controller to controller Wiren Board .
Suitable for the families of controllers Carel BASIC and Carel EASY, not a complete list of models:
- PYEZ1R05J5
- PYEZ1R05J4
- PYEZ0ZB580
- PJEZC00100
- PJEZC0E000
- PJEZC0E120
- PJEZC0H000
- PJEZC0M000
- PJEZC0M100
- PJEZC0MG00
- PJEZC1E0I0K
- PJEZMNN0E0
- PJEZMNN0E0
- PJEZMNP000
- PJEZS0GB00
- PJEZS0H000
- PJEZX00000
- PJEZY00000
- PJEZY0H100
- PJEZY0M000
- PJEZY0M100
If you did not find your model in the list, see other network cards for refrigeration. Perhaps your controller is supported by one of them.
