en

Other devices

View as:
GroupsList
Other

Devices produced by Wiren Board that did not fit into other categories

  • Infrared controlled modules
  • Ethernet gateways
  • Water metering and leakage control
  • 1-Wire sensors
WB-T120WB-T120
WB-T120
RS-485 bus terminator WB-T120
120 Ohm resistor in a convenient housing with a terminal block. Installed at the ends of the RS-485 line to suppress reflections.
In stock 338 pcs.
€4.69
WB-MWAC v.2WB-MWAC v.2
WB-MWAC v.2
Water metering and leakage control module WB-MWAC v.2

Everything you need for a typical task of monitoring the “wet zone”:

  • water leak detection
  • automatic control of shut-off valves
  • counting pulses from water meters even in the absence of electricity.

Up to 6 monitoring zones, “dry contact” outputs, “wet cleaning” mode and easy integration into the automation system.

The main differences from the previous version: by default, five inputs are configured for connecting sensors, input activation indicators, two buttons on the front panel, support for Larnitech sensors and a “wet cleaning” mode.

In stock 153 pcs.
€96.72
WB-MIR v.3WB-MIR v.3
WB-MIR v.3
Infrared control device WB-MIR v.3
A learning module with a remote infrared transmitter and an RS-485 interface. IR commands are programmed using a remote control from household appliances or via the RS-485 interface.

It is used in automation systems for controlling air conditioners, fan coils, heat curtains, televisions, etc. It is installed in the housing of the controlled device.

In stock 1149 pcs.
€38.10
WB-MCM8WB-MCM8
WB-MCM8
8-channel pulse counter module WB-MCM8

8-channel module of discrete and counting inputs with RS-485 interface. Allows you to receive signals from devices with pulse outputs of the “dry contact” and “open collector” types.

Used for connecting encoders, switches, reed switches and metering devices with pulse output in automation and dispatching systems.

In stock 280 pcs.
€44.55
WB-MAO4WB-MAO4
WB-MAO4
Module analog output 0-10V WB-MAO4
Analog output module with 4 outputs 0-10 V or PWM and RS-485 interface.
Used to control devices with 0-10V or PWM interfaces — lamps, servos, air damper drives, valves, etc. in automation systems.
In stock 134 pcs.
€61.55
WB-MAO4-20mAWB-MAO4-20mA
WB-MAO4-20mA
Module analog output 0…20 mA WB-MAO4-20mA
Analog output module with 4 current outputs 4-20 mA and RS-485 interface.
Used to control devices with 0-20 mA, 4-20 mA interfaces - frequency converters, servo drives, air damper drives, valves, etc. in automation systems.
In stock 52 pcs.
€76.20
WB-MCM8HVWB-MCM8HV
WB-MCM8HV
AC detector module WB-MCM8HV
An 8-channel mains voltage presence detector module with an RS-485 interface, designed for monitoring circuit breaker status, polling indicator lamps, and similar tasks.
In stock 232 pcs.
€51.29
WB-UPS v.3WB-UPS v.3
WB-UPS v.3
Battery module WB-UPS v.3
Lithium-ion Battery Uninterruptible Power Supply (2×18650).
During a loss of input power, it provides 9 V to 25 V output to loads not exceeding 15 W.
In stock 56 pcs.
€84.99
WB-MGE v.3WB-MGE v.3
WB-MGE v.3
RS-485, Ethernet, Wi-Fi, WBIO interfaces WB-MGE v.3
The WB-MGE v.3 gateway is designed to connect devices with RS‑485 and WBIO (I/O modules) interfaces over Ethernet and Wi‑Fi.
Two independent RS‑485 ports, and each of them can do:
Modbus RTU gateway
— Modbus TCP ⇄ Modbus RTU conversion, up to 8 clients per port.
Transparent mode
— any protocol over RS‑485 (Modbus RTU, DOOYA, AKKO and so on) is passed through as-is.
Sniffer and master emulator
— real-time decoding of the bus exchange and manual request sending.
Caching multimaster
— non-invasive data collection from someone else's line, served through a separate Modbus TCP server.
Repeater
— relaying between the RS‑485 ports: range extension, branching, noise isolation.
Transmission disable (TX)
— receive-only mode for a safe connection to a live system.
WBIO modules connect via the side I/O Bus connector and are exposed as a Modbus device on the RS485‑2 bus with an address printed on the module label. WBIO support can be disabled in the web interface to free the port for any protocols.
In stock 313 pcs.
€87.92
WB-MIOWB-MIO
WB-MIO
Interface converter WB-MIO
Designed for remote connection of WBIO devices (I/O modules) using the Modbus protocol over the RS-485 bus.
Allows you to separate the I/O modules from the Wiren Board controller and move them to another DIN rail or into another electric cabinet.
This bus coupler allows you to use the I/O modules as standalone devices with third party controllers.
In stock 54 pcs.
€35.17
WB-USB485WB-USB485
WB-USB485
Interface converter WB-USB485
USB<->RS-485 interface converter with 12V (400mA) power supply to control devices via RS-485 bus from a computer, laptop, tablet or Linux PLC.
WB-USB485 can be used to configure and update the firmware of Wiren Board Modbus devices. Supports any protocol that uses the RS-485 bus.
The device has three indicators: overcurrent (Vout_OK) and exchange on the RS-485 bus (RX, TX).
No driver installation required on latest versions of Windows, Linux, MacOS and Android.
In stock 185 pcs.
€32.24
WB-MDIO8WB-MDIO8
WB-MDIO8
8-channel input and output module WB-MDIO8
The device is under development, the estimated start of deliveries is the first quarter of 2025.
Compact module for connecting switches. Allows you to use any available switches to connect to the automation system. 8 button inputs and six backlight outputs (5 V, 12 V and 24 V). Size 13x20 mm.
Not available
€46.31
Any questions? Please contact us.

Legal purchase terms

  • These terms of sale are developed based on the Civil Code of the Republic of Kazakhstan, the Law of the Republic of Kazakhstan "On Consumer Protection," and other regulatory acts. These rules regulate the procedure for retail purchase and sale of goods through the online store, being a public offer addressed to individuals and legal entities ("Buyers").
  • The Buyer accepts the terms and conditions set out in these terms and conditions by placing an Order on the online store's website. An order is considered properly executed if the Buyer provides the Seller with the following information:
    • Buyer's last name and first name
    • Phone number
    • Delivery address
    • Product name
    • Quantity
  • The Buyer grants the Seller the right to use all personal data transmitted in the Order for the following purposes:
    • Fulfilling obligations to the Buyer
    • Forming and developing a loyalty program
    • Informing Buyers about news from the online store
  • Delivery is carried out through third-party services and is available on weekdays from 9:00 to 18:00. Delivery times depend on the region and range from 1 to 14 business days. Delivery terms include the following:
    • Delivery is without demonstration of the product
    • If the Buyer disagrees with the delivery terms, they may cancel the order at any time before receiving it
    • Delivery costs are charged in case of refusal of the product
    • The Buyer must check the product packaging for damages upon receipt
  • Payment for ordered Products can be made:
    • By bank transfer based on the invoice issued to the Buyer
    • By credit card via a payment link generated for the Buyer
  • Orders are processed on working days from 10:00 to 18:00 Astana time. Orders placed after 18:00 will be processed the next business day.
  • Products of good quality can be returned within 14 days of receipt, provided they have not been used. For returns:
    • The Buyer must email a return request to the Seller's support
    • The refund excludes delivery costs
    • Refunds are processed within 10 days of claim submission
  • The warranty period for the Product is 24 months from the date of shipment.
  • The risk of accidental loss or damage passes to the Buyer at the time of transfer, as confirmed by the Buyer's signature on the delivery documents. Ownership passes upon full payment.
  • The legislation of the Republic of Kazakhstan applies to relations between the Buyer and the Seller.
  • The Seller reserves the right to amend these terms. Changes will be posted on the website at least 7 days before their effective date.
  • The Buyer guarantees they understand and accept all terms unconditionally and in full.
  • All disputes will be resolved through negotiations. If no agreement is reached, disputes will be referred to the arbitration court of Astana.