Refrigerator network cards

Our network cards add an RS-485 interface with Modbus RTU support to Danfoss and Carel refrigeration controllers.
You can connect chests, slides and freezers to SCADA or a controller with Modbus RTU support and monitor their technical condition, as well as control: defrost, change temperature settings, etc.
Network card for Danfoss refrigeration controller, which adds RS-485 interface with Modbus RTU protocol support. The device is installed in the controller case into a standard connector.
WB-REF-DF-178A can be used instead of original network card ModBus EKA 178A (084B8564) to connect Danfoss temperature controller to controller Wiren Board .
Suitable for models:
- EKC 202D (084B8536)
- EKC 202B (084B8691)
- EKC 204A1 / AK-CC 210 (084B8520)
If you did not find your model in the list, see other network cards for refrigeration. Perhaps your controller is supported by one of them.
Network card for Danfoss refrigeration controller, which adds RS-485 interface with Modbus RTU protocol support. The device is connected to a Danfoss controller via a standard TTL connector. Flex cable included.
WB-REF-DF-ERC21 can be used in place of the original Danfoss 191U0021 NIC to connect a Danfoss temperature controller to a controller Wiren Board .
Suitable for models:
- ERC 211
- ERC 213
- ERC 214
If you did not find your model in the list, see other network cards for refrigeration. Perhaps your controller is supported by one of them.
Network card for Carel and Eliwell refrigeration controllers that adds an RS-485 interface with Modbus RTU protocol support. The device is connected to the refrigeration controllers via a standard connector. Cable for connection included.
WB-REF-U can be used to connect Carel and Eliwell controllers to Wiren Board controller, replacement card list:
- Carel - IROPZ48505 (IROPZ48500) and MCH2004850.
- Eliwell - DMI1001002000, DMI1002002000, DMI1003002000, SAR0RA00X701, BA11250N3700, BA00000XD000, BA00000XD002, BA00000XD001, BA10000R3700.
Compatible with controllers:
- Carel: BASIC, EASY, μRack, μC2SE, μC2, μGEO.
- Eliwell: ID 974 LX, ID 985 LX, ID PLUS 961, ID PLUS 974.
See the documentation for a complete list of models.
If you don't find your model in the list, check out other network cards for refrigeration equipment. Perhaps your controller is supported by one of them.